Offer | Need | All

Stationery - CHINA




Rexine Embossing Machine offer Stationery

Rexine Embossing Machine

Stationery - - CNY 10

Rexine embossing machine Introduction: This machine is used to emboss pattern and trademarks, press bubble on various fabrics (mainly embossing of lining), It can also be used for super gin...

Two-roller Bubble Embossing Machine offer Stationery

Two-roller Bubble Embossing Machine

Stationery - - CNY 10

Two-roller bubble embossing machine Introduction:This machine is not only used for ginning and rolling bubbles and trademarks in a variety of fabric but also in the non-woven fabric,Website:http://www...

Four Roller Embossing Machine offer Stationery

Four Roller Embossing Machine

Stationery - - CNY 10

Four roller embossing machine Introduction:This machine is applied for embossing polyester fabric,Website:http://www.embochina.com, nonwoven fabric, suede fabric, antarctic cotton, knitting, dyeing, g...

Three Roller Embossing Machine offer Stationery

Three Roller Embossing Machine

Stationery - - CNY 10

Three roller embossing machine Introduction:This machine is used to emboss pattern and trademarks,Website:http://www.embochina.com, press bubble on various fabrics (mainly embossing of lining), It can...

Sofa And Curtain Fabric Embossing Machine offer Stationery

Sofa And Curtain Fabric Embossing Machine

Stationery - - CNY 10

Sofa and curtain fabric embossing machine Introduction:This sofa and curtain fabric embossing machine is applied for embossing and rolling bubbles in Antarctic cotton,Website:http://www.embochina.com,...

DC2680-C(φ660mm) Lathe Machine offer Stationery

DC2680-C(φ660mm) Lathe Machine

Stationery - - CNY 10

MODELSDC2680-C/DC26120-CCAPACITYMax.swing over bedФ660mmMax.swing over carriageФ420mmMax. swing over gapФ870mmMax.turning diameterФ660mmEffective length of gap230mmDistance between centers2000/3000mmS...

DC2060-C(φ500mm) Clutch Lathe offer Stationery

DC2060-C(φ500mm) Clutch Lathe

Stationery - - CNY 10

MODELSDC2060-C/DC2080-CCAPACITYMax.swing over bedФ500mmMax.swing over carriageФ310mmMax. swing over gapФ720mmDistance between centers1500/2000mmMax turning length1350/1850mmSPINDLESpindle noseD8Spindl...

DC1440-K(φ360mm) Metal Lathe offer Stationery

DC1440-K(φ360mm) Metal Lathe

Stationery - - CNY 10

MODELS DC1440-K ...

DC1640-E(φ330mm) Lathe Machine offer Stationery

DC1640-E(φ330mm) Lathe Machine

Stationery - - CNY 10

 MODELSDC1640-ECAPACITYMax.swing over bed400mmMax.swing over cross slide250mmMax. swing over gap660mmDistance between centers1000mmBed with336mmHEADSTOCKSpindle bore80mmSpindle mountD1-8Taper bore of ...

DC1340-B(φ330mm) Lathe offer Stationery

DC1340-B(φ330mm) Lathe

Stationery - - CNY 10

MODELSDC1330-B/DC1340-BCAPACITYMax.swing over bedФ330mmMax. swing over gapФ476mmMax.swing over slideФ198mmWidth of bed186mmMax.length of workpiece(two centers)750/1000mmSPINDLESpindle noseD4Spindle bo...